BLXYH - AROCLOR 1260 1UG/UL 1 ML, 44809

  • MSDS: BLXYH
  • Manufacturer: SUPELCO INC
  • Product Name: AROCLOR 1260 1UG/UL 1 ML, 44809
  • National Stock Number: 6810-00N021825
Product Identification

Product ID:AROCLOR 1260 1UG/UL 1 ML, 44809
MSDS Date:10/25/1991
FSC:6810
NIIN:00N021825
MSDS Number: BLXYH

Responsible Party
SUPELCO INC
SUPELCO PARK
BELLEFONTE, PA 16823-0048
US

Emergency Phone: 814-359-3441

Info Phone: 814-359-3441

Cage: 54968

Contractor
SIGMA-ALDRICH INC.
14508 ST. LOUIS, MO 63103 US

Telephone: 314-771-5765/414-273-3850X5996

Cage: 54968

Ingredients

POLYCHLORINATED BIPHENYL (AROCLOR 1260). LD50 (ORAL,

CAS: 11096-82-5

RTECS: TQ1362000

Fraction By Weight: 0.1%

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PENTANE 2,2,4-TRIMETHYL-; (ISOOCTANE)

CAS: 540-81-1

RTECS: SA3320000

Fraction By Weight: 100%

Hazards

LD50 LC50 Mixture:SEE ING 1
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CONTAINS MATERIAL(S) KNOWN TO THE
STATE OF CALIFIRNIA TO BE CANCER CAUSING.
Explanation of Carcinogenicity:AROCLOR:IARC CLASS 2B, NTP GROUP B
CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:FLUSH
WITH LARGE AMOUNTS OF WATER. INHAL:IMMEDIATELY REMOVE TO FRESH AIR.
GIVE OXYGEN IF BREATHING IS LABORED. IF BREATHING STOPS, GIVE
ARTIFICIAL R ESPIRATION. INGEST:NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. NEVER TRY TO MAKE AN UNCONSCIOUS PERSON VOMIT.
DO NOT INDUCE VOMITING. SEEK MD ATTENTION.

Fire Fighting

Flash Point Method:CC
Flash Point:10F,-12C
Lower Limits:1.1
Upper Limits:6.0
Extinguishing Media:CARBON DIOXIDE, FOAM AND DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT WHEN FIGHTING A CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:CAN REACT VIGOROUSLY WITH REDUCING
MATERIALS.

Accidental Release

Spill Release Procedures:TAKE UP WITH ABSORBENT MATERIAL. VENTILATE
AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN SEALED CONTR IN COOL, DRY
LOCATION. KEEP AWAY FROM HEAT. STORE IN DRY WELL VENT AREA. KEEP
AWAY FROM IGNITION SOURCES.
Other Precautions:AVOID EYE AND SKIN CONTACT. AVOID BREATHING VAPORS.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVED FACE MASK WITH ORGANIC
VAPOR CANISTER.
Ventilation:USE ONLY IN WELL VENTILATED AREAS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:F3
Boiling Pt:B.P. Text:210F,99C
Melt/Freeze Pt:M.P/F.P Text:-177F,-116C
Vapor Pres:41
Vapor Density:3.90
Spec Gravity:.690
Evaporation Rate & Reference:>1 (ETHER = 1)
Appearance and Odor:CLEAR COLORLESS LIQUID.
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
REDUCING AGENTS.

Disposal

Waste Disposal Methods:COMPLY WITH ALL APPLICABLE FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.